1,4-Naphthoquinone is a dark brown color powder. The substance is derived from naphthalene oxidation with chromium trioxide.
1,4-Butanediol is a versatile chemical intermediate, presenting himself as a colorless, non-corrosive, high boiling point. 1,4-Butanediol is completely soluble in water, ketones, acetates and glycol esters, but can be miscible or partially miscible aromatic or chlorinated hydrocarbon.
1,6-Hexanediol is an organic compound, colorless, crystalline solid having a melting point of 42° C and boiling point of 208° C. It is insoluble in water and is hygroscopic .
2-Hydroxypropyl Acrylate (HPA)
2-Hydroxypropyl Acrylate homopolymers and copolymers form. Copolymers of 2-hydroxypropyl acrylate may be prepared with acrylic acid and salts, amides and esters, and methacrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl, vinylidene chloride, styrene, butadiene, unsaturated polyesters and drying oils. 2-Hydroxypropyl Acrylate is also very useful feedstock for chemical synthesis, since it readily undergoes addition reactions with a wide variety of organic and inorganic compounds.
2- Methyl Imidazol is presented in the form of colorless or yellowish crystals with amine odor.
3-methoxypropylamine is a slightly yellowish colorless liquid, free from suspended in water and is miscible in almost all common organic solvents.
ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)
PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.
Glacial Acrylic Acid (GAA)
Acrylic Acid, also called propenoic acid or vinyl carboxylic acid is an unsaturated monocarboxylic acid which belongs to the series of fatty acids. It is a colorless liquid with a penetrating odor.
The Adipic acid is presented in the form of crystalline powder, odorless white. It is partially soluble in water and soluble in alcohol and acetone.
Trimethylene Amino Phosphonic Acid (ATMP 50%)
ATMP is a clear liquid (solution) of light yellow color soluble in aqueous and acidic solutions, and insoluble in most organic solvents. It is soluble in all proportions with water; NaOH 40% and 98% sulfuric acid.
Benzoic acid is the most important aromatic carboxylic acid. It is a solid flakes, white characteristic odor. The structure of benzoic acid favors the formation of intermolecular hydrogen bonds, despite the large volume occupied by the benzene ring.
Citric Acid (Mono / Anhydrous)
The Citric acid is a weak organic acid, is used as a natural preservative (antioxidant), is a colorless solid.
Ethylene diphosphonic acid (HEDP 60%)
Clear liquid, viscous, colorless or pale yellow mainly used in boilers and heat exchanger pipes as chelating and corrosion resistant agent. It is also used for cleaning metal and non-metal, as stabilizer, bleach and color fixing agent for textile products.
Fumaric Acid is a dicarboxylic acid, unsaturated, normal chain, which presents itself in the form of white crystalline solid. It is soluble in alcohol, slightly soluble in ether and sparingly soluble in chloroform. Used mainly in the production of polyesters and alkyd resins, plasticizers (fumarates), besides being an important additive for the food industry.
The aromatic dicarboxylic acid is in the form of a white crystalline powder and is water insoluble. The purified isophthalic acid (PIA) improves the hardness characteristics, corrosion resistance and hydrolytic stability in paints and resins giving them excellent thermal stability.
The Itaconic Acid or methyl succinic ene, is used primarily as a co-monomer in the production of styrene butadiene latex and acryl nitril acrylate with applications in the paper coating industry and architecture. It is a white crystalline powder, soluble in water and partially soluble in methanol, ethanol or acetone.
Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.
P-Toluene Sulfonic Acid - APTS 65/95%
P-Toluene Sulfonic Acid is a strong organic acid, approximately one million times stronger than benzoic acid. Also unlike some strong mineral acids (especially nitric acid, sulfuric acid and perchloric acid), P-Toluene Sulfonic acid is not an oxidizer.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Benzyl alcohol is a derivative of benzaldehyde, the toluene produced by the oxidation process is colorless appearance and slightly aromatic odor.
Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.
Aminoethylethanolamine is a colorless viscous liquid, soluble in water and slightly soluble in ether. Air absorbs carbon dioxide releasing slight odor of ammonia.
Colorless liquid, stable under normal conditions of use and storage. It promotes urethane reaction and are commonly used in high rigid foam applications of water to reduce friability.
Benzotriazole (BTA) is a heterocyclic compound containing three nitrogen atoms, granular appearance and has white color, it is a polar compound very soluble in water, is not readily degradable.
Ammonium bifluoride is a white or transparent crystal with characteristic odor. It is deliquescent, slightly soluble in alcohol and readily soluble in cold water. In hot water has strong acidity and toxicity. It is used as a chemical reagent, glass production, used as an industrial disinfectant, preservative, silicon and copper treatment agent, detergent ceramics, alloys electrons and water supply system of the boiler. It is also used in cleaning oil pipe.
Anhydrous Sodium Borohydride
Sodium borohydride, also known as sodium tetrahydroborate. This white solid, as a powder usually found soluble in methanol and water but reacts with both the absence of a base.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
The carbohydrazide is a white crystalline powder used as an oxygen scavenger to prevent corrosion in closed water systems, it is generally used when necessary to stabilize the pressure and temperature. It is also used in the photographic industry as a pharmaceutical intermediate, stabilizer and water treatment products.
Propylene carbonate is a liquid with high boiling, non-volatile and colorless. It has a limited miscibility with water at room temperature, but is completely miscible with many organic solvents (eg ether, acetone, glycol, chloroform, DMF, ethyl alcohol, ethyl acetate).
Casein Milky mesh 30/60/90
Casein is a milky product powder insoluble in water, used in food products, paints and special adhesives.
It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.
It is a clear to yellowish liquid with fishy odor, melting point of -17.7 ° C and boiling point of 134.5 ° C, miscible with water. Like other amines, alkaline medium is compared to strong bases such as NaOH, but is a stronger base than their corresponding aromatic, aniline, which differs only in that its ring is aromatic. It is flammable with a flashpoint of 28.6 ° C. Explosive mixtures with air can be formed above 26 ° C.
Cyclo-hexalamina is used as an intermediate in the synthesis of some herbicides, antioxidants, vulcanization accelerators, drugs (e.g., mucolytics, analgesics, bronchodilators, corrosion inhibitors, some sweeteners (especially cyclamates), etc.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
The benzyl chloride is a liquid solvent used as intermediate agent in a wide range of segments.
Anhydrous Zinc Chloride
Zinc chloride is in the form of colorless crystals or white and highly soluble in water. It is hygroscopic and deliquescent. Samples should be protected from moisture sources, including the water vapor present in the air. Zinc chloride finds wide application in textile processing, metallurgical fluxing agents, and chemical synthesis such as dehydrating agent.
Sodium chlorite (30%, 40% and 82% anhydrous)
Solid sodium chlorite is a white crystalline powder or yellow-green, slightly hygroscopic. Easily soluble in water. It is used in paper manufacturing, the bleaching of the fibers. The main application is the sodium chlorite to generate chlorine dioxide for bleaching and stripping of textile fibers, wood pulp and paper.
Dibutylamine (DNBA) is a secondary amine, is in the form of a colorless liquid with ammonia odor.
White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.
The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.
Diethylaniline or N, N-diethylaniline is the organic compound, the aniline derivative dietilado. It is a tertiary amine, similar ethylated N, N-dimethylaniline (DMA), also called N-fenildietilamina, diethylamino benzene, DEA N, N-dietilbenzenamina; N, N-dietilaminobenzeno. It is presented as a pale yellow to brown liquid with a melting point of 0 ° C and solubility in water of 1.4 g / 100ml.
Diethylenetriamine is a colorless liquid suspension-free, water-miscible and in almost all organic solvents.
Diethylethanolamine is a clear flammable liquid with amine odor. Used in paints and varnishes, water treatment, pharmaceutical industry, as corrosion inhibitor and neutralizer.
Diethylhydroxylamine 98% (DEHA 98)
Dimethyl amine 60% (DMA 60)
Colorless liquid as the amine odor, hazardous reactions with oxidizing materials and exothermic reactions with acids, is water miscible. It intermediate for the chemical industry, for example, the production of N, N-dimethylformamide, N, N-dimethylacetamide and dimethyl aminoalcohols. Initial product for vulcanization accelerators, emulsifiers, plasticizers, corrosion inhibitors, crop protection agents and pesticides.
The DMEA is a clear liquid with a slight ammonia odor. It is water miscible, and ether alcohols.
Colorless liquid with faint characteristic odor, does not decompose distillation, water-miscible alcohols, ethers, ketones, esters, carbon disulfide, and aromatic and chlorinated hydrocarbons. The DMF solvent properties are especially attractive due to the high dielectric constant aprotic solvent and a wide range of liquid and low volatility. It is often used for chemical reactions and other applications requiring a high solvency power. The product is known as a universal solvent.
Ethylenediamine is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.
Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.
Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.
Glutaraldehyde 50 %
Hexamethylene tetramine (Urotropina)
It is used in the plastics industry as phenol-formaldehyde hardener and urea formaldehyde resins, as a vulcanization accelerator, urea as an additive to fertilizers, avoiding hardening and improves the fluidity in the manufacture of metals as a corrosion inhibitor in production of pesticides, in the manufacture of fuel pellets in analytical chemistry as a component of buffers.
Imidazole or imidazole is an organic compound, aromatic heterocyclic and classified as alkali. It is a yellowish crystal with amine odor.
LAUROX is a white solid dilauroyl peroxide used as co-polymerization initiators of styrene, ethylene, vinyl chloride, vinylidene chloride, acrylates and methacrylates, being a thermally unstable substance that can undergo self-accelerating decomposition. In many cases they offer higher reactor efficiency by combining with a more reactive initiator such as peroxydicarbonate.
Melamine is an alkaline substance, considered a trimer of cyanamide, with 66% of its mass consists of nitrogen. It is used in the manufacture of plastics (with formaldehyde) and flame retardant products. It is mainly condensed with formaldehyde to produce melamine- formaldehyde, which hardens when heated.
Sodium Metabisulfite Grades
Sodium Metabisulfite is an inorganic chemical present in the form of crystals and / or slightly yellowish white powder, whose crystals have an odor of sulfur dioxide. It is used as reducing agents for chemical, pharmaceutical, photographic and textile industries and as food additives
Methyl Isobutyl Ketone (MIBK)
Methyl Diethanolamine (MDEA)
Hygroscopic liquid with amine odor, miscible in all proportions with water and in most organic solvents. It acts as a tertiary amine or alcohol. The product is stable at elevated temperatures, but must be keep away from oxidants and acids.
Mono Methylethanolamine (MMEA)
MMEA is a colorless, hygroscopic liquid with an odor similar to amine. The freshly distilled product is colorless, but prolonged storage can cause yellowing. MMEA is miscible in all proportions with water. It is also soluble in most organic solvents.
Chemically it behaves as a secondary amine and an alcohol. Neutralization of amino acids by function results in salt formation. The product is relatively stable at elevated temperatures, but must be keep away from oxidants and acids.
Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.
Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.
N-Methyl 2-Pyrrolidone (NMP)
N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
Pentaerythritol, a white crystalline polyol is a "building block" in organic synthesis for the preparation of many polyfunctional compounds such as the explosive PETN and pentaerythritol triacrylate. Pentaerythritol derivatives are components of alkyd resins, varnishes, PVC stabilizers, tall oil esters, olefins and antioxidants.
The phosphorous pentoxide is white crystalline solid pungent phosphoric acid anhydride. It is a powerful desiccant.
Primer for copolymerization of styrene, acrylonitrile, vinylacetate, methacrylates and acrylates.
Potassium permanganate is presented in the form of crystalline powder, odorless violet color.
Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.
Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Propylene Glycol USP (PG - USP)
Propylene glycol USP is a clear, colorless, odorless, viscous, hygroscopic with low volatility. It is miscible with water, alcohols, esters and ketones. It has high purity thus meeting the requirements of USP and European Pharmacopoeia. It can be used as solvent, additive, humectant, lubricant, cleaning agent, among others.
The Resorcinol (Resorcinol) is an aromatic product, and water soluble crystalline appearance. It is used in a wide range of segments of the chemical industry as a reaction intermediate.
SPECTROGEL BP is a rheological additive developed from a modified smectite organically suitable for use in dilute alkyd systems in aliphatic solvents or aliphatic / aromatic mixtures and having low to medium polarity characteristics.
White and odorless. Element additive in the treatment of the steel surface. Metal extraction, flotation aid for copper ores.
THF is tetrahydrofuran or a heterocyclic organic compound used as the solvent, obtained by hydrogenation of furan. It has low viscosity, dielectric constant of 7.6, similar to the odor of ethyl ether. It is soluble in water.
Ammonium thiocyanate product is a colorless powder, odorless, higrocópicos, readily soluble in water and ethyl alcohol.
Tolyltriazole is a colorless or white powder or granule. It is a mixture of 4-methyl benzotriazole and 5-methyl-benzotriazole, melting point is 80 C to 86 C, soluble in ethanol, benzene, toluene, chloroform and aqueous liquor, and hardly soluble in water.
TRIGONOX B is a liquid pH neutral liquid, soluble in most organic solvents. Initiator for copolymerization of ethylene, styrene, acrylates and methacrylates. TRIGONOX B is a monofunctional peroxide that is used for the cross-linking of thermoplastic polyolefins.
Trigonox C, tert-butyl peroxybezoate, is an aromatic per-ester, which is used for curing unsaturated polyester resins at temperatures.
Trimethylolpropane - TMP
Trimethylolpropane is white crystalline material. It is a polyhydric alcohol having three hydroxy groups.