1,6-Hexanediol is an organic compound, colorless, crystalline solid having a melting point of 42° C and boiling point of 208° C. It is insoluble in water and is hygroscopic .
3-methoxypropylamine is a slightly yellowish colorless liquid, free from suspended in water and is miscible in almost all common organic solvents.
ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)
PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.
Glacial Acrylic Acid (GAA)
Acrylic Acid, also called propenoic acid or vinyl carboxylic acid is an unsaturated monocarboxylic acid which belongs to the series of fatty acids. It is a colorless liquid with a penetrating odor.
The Adipic acid is presented in the form of crystalline powder, odorless white. It is partially soluble in water and soluble in alcohol and acetone.
Trimethylene Amino Phosphonic Acid (ATMP 50%)
ATMP is a clear liquid (solution) of light yellow color soluble in aqueous and acidic solutions, and insoluble in most organic solvents. It is soluble in all proportions with water; NaOH 40% and 98% sulfuric acid.
Benzoic acid is the most important aromatic carboxylic acid. It is a solid flakes, white characteristic odor. The structure of benzoic acid favors the formation of intermolecular hydrogen bonds, despite the large volume occupied by the benzene ring.
Citric Acid (Mono / Anhydrous)
The Citric acid is a weak organic acid, is used as a natural preservative (antioxidant), is a colorless solid.
Ethylene diphosphonic acid (HEDP 60%)
Clear liquid, viscous, colorless or pale yellow mainly used in boilers and heat exchanger pipes as chelating and corrosion resistant agent. It is also used for cleaning metal and non-metal, as stabilizer, bleach and color fixing agent for textile products.
Fumaric Acid is a dicarboxylic acid, unsaturated, normal chain, which presents itself in the form of white crystalline solid. It is soluble in alcohol, slightly soluble in ether and sparingly soluble in chloroform. Used mainly in the production of polyesters and alkyd resins, plasticizers (fumarates), besides being an important additive for the food industry.
The Itaconic Acid or methyl succinic ene, is used primarily as a co-monomer in the production of styrene butadiene latex and acryl nitril acrylate with applications in the paper coating industry and architecture. It is a white crystalline powder, soluble in water and partially soluble in methanol, ethanol or acetone.
Monochloroacetic Acid (MCA)
Monochloroacetic acid (MCA) is a white substance with characteristic odor reflection. Monochloroacetic acid is used as an intermediate in the synthesis of carboxylic cellulose of sodium and other substances such as ethyl chloroacetate, waxy, synthetic caffeine, thioglycotic acid, and dyes. Also used as herbicide.
Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.
P-Toluene Sulfonic Acid - APTS 65/95%
P-Toluene Sulfonic Acid is a strong organic acid, approximately one million times stronger than benzoic acid. Also unlike some strong mineral acids (especially nitric acid, sulfuric acid and perchloric acid), P-Toluene Sulfonic acid is not an oxidizer.
Succinic Acid (also called butanedioic acid), is a dicarboxylic acid having four carbon atoms, occurs naturally in plant and animal tissues, and metabolism is very important, participating directly in the Krebs cycle. The Succinic acid is a colorless crystalline solid melting at 185-187 ° C, soluble in water, slightly soluble in ethanol, ether, acetone and glycerin. The most common method of obtaining Succinic acid is the catalytic hydrogenation of maleic acid or maleic anhydride.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Benzyl alcohol is a derivative of benzaldehyde, the toluene produced by the oxidation process is colorless appearance and slightly aromatic odor.
Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.
Aminoethylethanolamine is a colorless viscous liquid, soluble in water and slightly soluble in ether. Air absorbs carbon dioxide releasing slight odor of ammonia.
Ammonium bifluoride is a white or transparent crystal with characteristic odor. It is deliquescent, slightly soluble in alcohol and readily soluble in cold water. In hot water has strong acidity and toxicity. It is used as a chemical reagent, glass production, used as an industrial disinfectant, preservative, silicon and copper treatment agent, detergent ceramics, alloys electrons and water supply system of the boiler. It is also used in cleaning oil pipe.
Anhydrous Sodium Borohydride
Sodium borohydride, also known as sodium tetrahydroborate. This white solid, as a powder usually found soluble in methanol and water but reacts with both the absence of a base.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
Potassium carbonate is a white powder soluble in water which forms a strongly alkaline solution and releases heat (exothermic reaction), is insoluble in alcohol. It can be produced by the reaction of carbon dioxide absorption by potassium hydroxide. It is deliquescent, often presenting as a damp or wet solid. It has historically been used to manufacture soap, glass (as a flux) and porcelain can also be used as a buffering agent in the production of mead and wine. Other denominations of potassium carbonate: Carbonate dipotassium, carbonate of potash, dipotassium salt, pearl gray, Potash, tartar salt, Artemisia salt.
It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
The benzyl chloride is a liquid solvent used as intermediate agent in a wide range of segments.
Dibutylamine (DNBA) is a secondary amine, is in the form of a colorless liquid with ammonia odor.
White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.
The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.
Diethylenetriamine is a colorless liquid suspension-free, water-miscible and in almost all organic solvents.
The DMEA is a clear liquid with a slight ammonia odor. It is water miscible, and ether alcohols.
Colorless liquid with faint characteristic odor, does not decompose distillation, water-miscible alcohols, ethers, ketones, esters, carbon disulfide, and aromatic and chlorinated hydrocarbons. The DMF solvent properties are especially attractive due to the high dielectric constant aprotic solvent and a wide range of liquid and low volatility. It is often used for chemical reactions and other applications requiring a high solvency power. The product is known as a universal solvent.
Ethylenediamine is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.
Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.
Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.
Glutaraldehyde 50 %
Melamine is an alkaline substance, considered a trimer of cyanamide, with 66% of its mass consists of nitrogen. It is used in the manufacture of plastics (with formaldehyde) and flame retardant products. It is mainly condensed with formaldehyde to produce melamine- formaldehyde, which hardens when heated.
Menthol is an organic compound obtained by synthesis or extraction of mentha piperita oil or other essential oils. It is a waxy, crystalline material in a clear or white. At room temperature, it is in solid state, and enters a molten state at a few degrees above.
Sodium Metabisulfite Grades
Sodium Metabisulfite is an inorganic chemical present in the form of crystals and / or slightly yellowish white powder, whose crystals have an odor of sulfur dioxide. It is used as reducing agents for chemical, pharmaceutical, photographic and textile industries and as food additives
Methyl Isobutyl Ketone (MIBK)
Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.
Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.
N-Methyl 2-Pyrrolidone (NMP)
N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
The phosphorous pentoxide is white crystalline solid pungent phosphoric acid anhydride. It is a powerful desiccant.
PERKADOX CH 50 is used as a curing agent for unsaturated polyester resins and acrylic resins. It offers excellent free flowing properties. PERKADOX CH 50 provides a very fast curing that is hardly influenced by moisture and fillers. Being thermally unstable substance, it can undergo self-accelerated decomposition. Easy to disperse and dissolving rapidly in unsaturated polyester resins and acrylic resins.
Primer for copolymerization of styrene, acrylonitrile, vinylacetate, methacrylates and acrylates.
Potassium permanganate is presented in the form of crystalline powder, odorless violet color.
Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.
Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
THF is tetrahydrofuran or a heterocyclic organic compound used as the solvent, obtained by hydrogenation of furan. It has low viscosity, dielectric constant of 7.6, similar to the odor of ethyl ether. It is soluble in water.
TRIGONOX A-W70 is an organic peroxide, known as tert-butyl hydroperoxide in 70% solution. TRIGONOX can be used as bulk initiator in aqueous solution and emulsion polymerization of styrene, acrylates and methacrylates.