Multichemie

LOGIN
Português  Português

PRODUCTS

1,4-Butanediol

1,4-Butanediol is a versatile chemical intermediate, presenting himself as a colorless, non-corrosive, high boiling point. 1,4-Butanediol is completely soluble in water, ketones, acetates and glycol esters, but can be miscible or partially miscible aromatic or chlorinated hydrocarbon.

FISPQ

Quotation

3-Methoxypropylamine (MOPA)

3-methoxypropylamine is a slightly yellowish colorless liquid, free from suspended in water and is miscible in almost all common organic solvents.

FISPQ

Quotation

4-[(4-amino-3-chloro-phenyl) methyl]-2-chloro-aniline

ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)

PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.

FISPQ

Quotation

Glacial Acrylic Acid (GAA)

Acrylic Acid, also called propenoic acid or vinyl carboxylic acid is an unsaturated monocarboxylic acid which belongs to the series of fatty acids. It is a colorless liquid with a penetrating odor.

FISPQ

Quotation

Oxalic Acid

Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.

FISPQ

Quotation

Sulfamic Acid

The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.

FISPQ

Quotation

Isopropyl Alcohol

Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.

FISPQ

Quotation

Ammonium Bifluoride

Ammonium bifluoride is a white or transparent crystal with characteristic odor. It is deliquescent, slightly soluble in alcohol and readily soluble in cold water. In hot water has strong acidity and toxicity. It is used as a chemical reagent, glass production, used as an industrial disinfectant, preservative, silicon and copper treatment agent, detergent ceramics, alloys electrons and water supply system of the boiler. It is also used in cleaning oil pipe.

FISPQ

Quotation

Anhydrous Sodium Borohydride

Sodium borohydride, also known as sodium tetrahydroborate. This white solid, as a powder usually found soluble in methanol and water but reacts with both the absence of a base.

FISPQ

Quotation

Butylhydroxytoluene (BHT)

BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.

FISPQ

Quotation

Carbohydrazide

The carbohydrazide is a white crystalline powder used as an oxygen scavenger to prevent corrosion in closed water systems, it is generally used when necessary to stabilize the pressure and temperature. It is also used in the photographic industry as a pharmaceutical intermediate, stabilizer and water treatment products.

FISPQ

Quotation

Propylene Carbonate

Propylene carbonate is a liquid with high boiling, non-volatile and colorless. It has a limited miscibility with water at room temperature, but is completely miscible with many organic solvents (eg ether, acetone, glycol, chloroform, DMF, ethyl alcohol, ethyl acetate).

FISPQ

Quotation

Casein Milky mesh 30/60/90

Casein is a milky product powder insoluble in water, used in food products, paints and special adhesives.

FISPQ

Quotation

Cyclohexanone

It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.

FISPQ

Quotation

Cyclohexylamine (CHA)

It is a clear to yellowish liquid with fishy odor, melting point of -17.7 ° C and boiling point of 134.5 ° C, miscible with water. Like other amines, alkaline medium is compared to strong bases such as NaOH, but is a stronger base than their corresponding aromatic, aniline, which differs only in that its ring is aromatic. It is flammable with a flashpoint of 28.6 ° C. Explosive mixtures with air can be formed above 26 ° C.

Cyclo-hexalamina is used as an intermediate in the synthesis of some herbicides, antioxidants, vulcanization accelerators, drugs (e.g., mucolytics, analgesics, bronchodilators, corrosion inhibitors, some sweeteners (especially cyclamates), etc.

FISPQ

Quotation

Benzalkonium Chloride 60% and 80%

Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.

It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.

FISPQ

Quotation

Anhydrous Zinc Chloride

Zinc chloride is in the form of colorless crystals or white and highly soluble in water. It is hygroscopic and deliquescent. Samples should be protected from moisture sources, including the water vapor present in the air. Zinc chloride finds wide application in textile processing, metallurgical fluxing agents, and chemical synthesis such as dehydrating agent.

FISPQ

Quotation

Sodium chlorite (30%, 40% and 82% anhydrous)

Solid sodium chlorite is a white crystalline powder or yellow-green, slightly hygroscopic. Easily soluble in water. It is used in paper manufacturing, the bleaching of the fibers. The main application is the sodium chlorite to generate chlorine dioxide for bleaching and stripping of textile fibers, wood pulp and paper.

FISPQ

Quotation

Dibutyl

Dibutylamine (DNBA) is a secondary amine, is in the form of a colorless liquid with ammonia odor.

FISPQ

Quotation

Dicyclohexanamine.

Dimethyl amine 60% (DMA 60)

Colorless liquid as the amine odor, hazardous reactions with oxidizing materials and exothermic reactions with acids, is water miscible. It intermediate for the chemical industry, for example, the production of N, N-dimethylformamide, N, N-dimethylacetamide and dimethyl aminoalcohols. Initial product for vulcanization accelerators, emulsifiers, plasticizers, corrosion inhibitors, crop protection agents and pesticides.

FISPQ

Quotation

Dimethylacetamide (DMAC)

Dimethylacetamide is a good solvent for organic and inorganic raw materials. It is miscible with water, alcohols, ether, ketones and aromatic compounds.

FISPQ

Quotation

Dimethylethanolamine (DMEA)

The DMEA is a clear liquid with a slight ammonia odor. It is water miscible, and ether alcohols.

Quotation

Ethylenediamine (EDA)

Ethylenediamine is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.

FISPQ

Quotation

Glycerin Bidistilled

Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.

FISPQ

Quotation

Glyoxal 40%

Glyoxal is a colorless to yellow liquid with a slight odor miscible in water.

FISPQ

Quotation

Sodium Gluconate

Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.

FISPQ

Quotation

Glutaraldehyde 50 %

Glutaraldehyde 50 % is a liquid colorless to yellowish, and may be water soluble.

FISPQ

Quotation

Imidazole

Imidazole or imidazole is an organic compound, aromatic heterocyclic and classified as alkali. It is a yellowish crystal with amine odor.

FISPQ

Quotation

Menthol Crystal

Menthol is an organic compound obtained by synthesis or extraction of mentha piperita oil or other essential oils. It is a waxy, crystalline material in a clear or white. At room temperature, it is in solid state, and enters a molten state at a few degrees above.

FISPQ

Quotation

Methyl Isobutyl Ketone (MIBK)

It is a colorless liquid ketone aspect, widely used as a solvent.

FISPQ

Quotation

Methyl Diethanolamine (MDEA)

Hygroscopic liquid with amine odor, miscible in all proportions with water and in most organic solvents. It acts as a tertiary amine or alcohol. The product is stable at elevated temperatures, but must be keep away from oxidants and acids.

FISPQ

Quotation

Mono Methylethanolamine (MMEA)

MMEA is a colorless, hygroscopic liquid with an odor similar to amine. The freshly distilled product is colorless, but prolonged storage can cause yellowing. MMEA is miscible in all proportions with water. It is also soluble in most organic solvents.

Chemically it behaves as a secondary amine and an alcohol. Neutralization of amino acids by function results in salt formation. The product is relatively stable at elevated temperatures, but must be keep away from oxidants and acids.

FISPQ

Quotation

Morpholine

Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.

FISPQ

Quotation

N-Methyl 2-Pyrrolidone (NMP)

N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.

FISPQ

Quotation

Paraformaldehyde 91/93%

Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.

FISPQ

Quotation

Pentaerythritol

Pentaerythritol, a white crystalline polyol is a "building block" in organic synthesis for the preparation of many polyfunctional compounds such as the explosive PETN and pentaerythritol triacrylate. Pentaerythritol derivatives are components of alkyd resins, varnishes, PVC stabilizers, tall oil esters, olefins and antioxidants.

FISPQ

Quotation

Potassium Permanganate

Potassium permanganate is presented in the form of crystalline powder, odorless violet color.

FISPQ

Quotation

Ammonium Persulfate

Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.

FISPQ

Quotation

Potassium Persulfate

Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.

FISPQ

Quotation

Sodium Persulfate

Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.

FISPQ

Quotation

Propylene Glycol USP (PG - USP)

Propylene glycol USP is a clear, colorless, odorless, viscous, hygroscopic with low volatility. It is miscible with water, alcohols, esters and ketones. It has high purity thus meeting the requirements of USP and European Pharmacopoeia. It can be used as solvent, additive, humectant, lubricant, cleaning agent, among others.

FISPQ

Quotation

Resorcinol

The Resorcinol (Resorcinol) is an aromatic product, and water soluble crystalline appearance. It is used in a wide range of segments of the chemical industry as a reaction intermediate.

FISPQ

Quotation

Hydroxylamine Sulfate

White and odorless. Element additive in the treatment of the steel surface. Metal extraction, flotation aid for copper ores.

FISPQ

Quotation

Tetrahydrofuran (THF)

THF is tetrahydrofuran or a heterocyclic organic compound used as the solvent, obtained by hydrogenation of furan. It has low viscosity, dielectric constant of 7.6, similar to the odor of ethyl ether. It is soluble in water.

FISPQ

Quotation

Antimony trioxide

Designer by Neoware - Criação e Desenvolvimento de Websites e Sistemas - Desafie nossa Criatividade