1,4-Butanediol is a versatile chemical intermediate, presenting himself as a colorless, non-corrosive, high boiling point. 1,4-Butanediol is completely soluble in water, ketones, acetates and glycol esters, but can be miscible or partially miscible aromatic or chlorinated hydrocarbon.
2- Methyl Imidazol is presented in the form of colorless or yellowish crystals with amine odor.
ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)
PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.
Citric Acid (Mono / Anhydrous)
The Citric acid is a weak organic acid, is used as a natural preservative (antioxidant), is a colorless solid.
Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.
Succinic Acid (also called butanedioic acid), is a dicarboxylic acid having four carbon atoms, occurs naturally in plant and animal tissues, and metabolism is very important, participating directly in the Krebs cycle. The Succinic acid is a colorless crystalline solid melting at 185-187 ° C, soluble in water, slightly soluble in ethanol, ether, acetone and glycerin. The most common method of obtaining Succinic acid is the catalytic hydrogenation of maleic acid or maleic anhydride.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.
Tertiary Amines (C12 to C16, Farmin)
Amines are a class of organic chemical compounds nitrogenous derivatives of ammonia (NH3) and resulting from partial or complete replacement of the hydrogens of the hydrocarbon groups per molecule.
Colorless liquid, stable under normal conditions of use and storage. It promotes urethane reaction and are commonly used in high rigid foam applications of water to reduce friability.
Benzotriazole (BTA) is a heterocyclic compound containing three nitrogen atoms, granular appearance and has white color, it is a polar compound very soluble in water, is not readily degradable.
Ammonium bifluoride is a white or transparent crystal with characteristic odor. It is deliquescent, slightly soluble in alcohol and readily soluble in cold water. In hot water has strong acidity and toxicity. It is used as a chemical reagent, glass production, used as an industrial disinfectant, preservative, silicon and copper treatment agent, detergent ceramics, alloys electrons and water supply system of the boiler. It is also used in cleaning oil pipe.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
The carbohydrazide is a white crystalline powder used as an oxygen scavenger to prevent corrosion in closed water systems, it is generally used when necessary to stabilize the pressure and temperature. It is also used in the photographic industry as a pharmaceutical intermediate, stabilizer and water treatment products.
Propylene carbonate is a liquid with high boiling, non-volatile and colorless. It has a limited miscibility with water at room temperature, but is completely miscible with many organic solvents (eg ether, acetone, glycol, chloroform, DMF, ethyl alcohol, ethyl acetate).
It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
Sodium chlorite (30%, 40% and 82% anhydrous)
Solid sodium chlorite is a white crystalline powder or yellow-green, slightly hygroscopic. Easily soluble in water. It is used in paper manufacturing, the bleaching of the fibers. The main application is the sodium chlorite to generate chlorine dioxide for bleaching and stripping of textile fibers, wood pulp and paper.
White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.
Diethylethanolamine is a clear flammable liquid with amine odor. Used in paints and varnishes, water treatment, pharmaceutical industry, as corrosion inhibitor and neutralizer.
Diethylhydroxylamine 98% (DEHA 98)
Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.
Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.
Glutaraldehyde 50 %
Imidazole or imidazole is an organic compound, aromatic heterocyclic and classified as alkali. It is a yellowish crystal with amine odor.
Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.
N-Methyl 2-Pyrrolidone (NMP)
N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
Potassium permanganate is presented in the form of crystalline powder, odorless violet color.
Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.
Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
The Resorcinol (Resorcinol) is an aromatic product, and water soluble crystalline appearance. It is used in a wide range of segments of the chemical industry as a reaction intermediate.
White and odorless. Element additive in the treatment of the steel surface. Metal extraction, flotation aid for copper ores.
THF is tetrahydrofuran or a heterocyclic organic compound used as the solvent, obtained by hydrogenation of furan. It has low viscosity, dielectric constant of 7.6, similar to the odor of ethyl ether. It is soluble in water.
Ammonium thiocyanate product is a colorless powder, odorless, higrocópicos, readily soluble in water and ethyl alcohol.
Tolyltriazole is a colorless or white powder or granule. It is a mixture of 4-methyl benzotriazole and 5-methyl-benzotriazole, melting point is 80 C to 86 C, soluble in ethanol, benzene, toluene, chloroform and aqueous liquor, and hardly soluble in water.