3-methoxypropylamine is a slightly yellowish colorless liquid, free from suspended in water and is miscible in almost all common organic solvents.
ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)
PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.
Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Benzotriazole (BTA) is a heterocyclic compound containing three nitrogen atoms, granular appearance and has white color, it is a polar compound very soluble in water, is not readily degradable.
Ammonium bifluoride is a white or transparent crystal with characteristic odor. It is deliquescent, slightly soluble in alcohol and readily soluble in cold water. In hot water has strong acidity and toxicity. It is used as a chemical reagent, glass production, used as an industrial disinfectant, preservative, silicon and copper treatment agent, detergent ceramics, alloys electrons and water supply system of the boiler. It is also used in cleaning oil pipe.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
The carbohydrazide is a white crystalline powder used as an oxygen scavenger to prevent corrosion in closed water systems, it is generally used when necessary to stabilize the pressure and temperature. It is also used in the photographic industry as a pharmaceutical intermediate, stabilizer and water treatment products.
Propylene carbonate is a liquid with high boiling, non-volatile and colorless. It has a limited miscibility with water at room temperature, but is completely miscible with many organic solvents (eg ether, acetone, glycol, chloroform, DMF, ethyl alcohol, ethyl acetate).
It is a clear to yellowish liquid with fishy odor, melting point of -17.7 ° C and boiling point of 134.5 ° C, miscible with water. Like other amines, alkaline medium is compared to strong bases such as NaOH, but is a stronger base than their corresponding aromatic, aniline, which differs only in that its ring is aromatic. It is flammable with a flashpoint of 28.6 ° C. Explosive mixtures with air can be formed above 26 ° C.
Cyclo-hexalamina is used as an intermediate in the synthesis of some herbicides, antioxidants, vulcanization accelerators, drugs (e.g., mucolytics, analgesics, bronchodilators, corrosion inhibitors, some sweeteners (especially cyclamates), etc.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
The benzyl chloride is a liquid solvent used as intermediate agent in a wide range of segments.
Anhydrous Zinc Chloride
Zinc chloride is in the form of colorless crystals or white and highly soluble in water. It is hygroscopic and deliquescent. Samples should be protected from moisture sources, including the water vapor present in the air. Zinc chloride finds wide application in textile processing, metallurgical fluxing agents, and chemical synthesis such as dehydrating agent.
Sodium chlorite (30%, 40% and 82% anhydrous)
Solid sodium chlorite is a white crystalline powder or yellow-green, slightly hygroscopic. Easily soluble in water. It is used in paper manufacturing, the bleaching of the fibers. The main application is the sodium chlorite to generate chlorine dioxide for bleaching and stripping of textile fibers, wood pulp and paper.
White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.
The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.
Diethylaniline or N, N-diethylaniline is the organic compound, the aniline derivative dietilado. It is a tertiary amine, similar ethylated N, N-dimethylaniline (DMA), also called N-fenildietilamina, diethylamino benzene, DEA N, N-dietilbenzenamina; N, N-dietilaminobenzeno. It is presented as a pale yellow to brown liquid with a melting point of 0 ° C and solubility in water of 1.4 g / 100ml.
Diethylethanolamine is a clear flammable liquid with amine odor. Used in paints and varnishes, water treatment, pharmaceutical industry, as corrosion inhibitor and neutralizer.
Diethylhydroxylamine 98% (DEHA 98)
Dimethyl amine 60% (DMA 60)
Colorless liquid as the amine odor, hazardous reactions with oxidizing materials and exothermic reactions with acids, is water miscible. It intermediate for the chemical industry, for example, the production of N, N-dimethylformamide, N, N-dimethylacetamide and dimethyl aminoalcohols. Initial product for vulcanization accelerators, emulsifiers, plasticizers, corrosion inhibitors, crop protection agents and pesticides.
The DMEA is a clear liquid with a slight ammonia odor. It is water miscible, and ether alcohols.
Colorless liquid with faint characteristic odor, does not decompose distillation, water-miscible alcohols, ethers, ketones, esters, carbon disulfide, and aromatic and chlorinated hydrocarbons. The DMF solvent properties are especially attractive due to the high dielectric constant aprotic solvent and a wide range of liquid and low volatility. It is often used for chemical reactions and other applications requiring a high solvency power. The product is known as a universal solvent.
Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.
Glutaraldehyde 50 %
Melamine is an alkaline substance, considered a trimer of cyanamide, with 66% of its mass consists of nitrogen. It is used in the manufacture of plastics (with formaldehyde) and flame retardant products. It is mainly condensed with formaldehyde to produce melamine- formaldehyde, which hardens when heated.
Sodium Metabisulfite Grades
Sodium Metabisulfite is an inorganic chemical present in the form of crystals and / or slightly yellowish white powder, whose crystals have an odor of sulfur dioxide. It is used as reducing agents for chemical, pharmaceutical, photographic and textile industries and as food additives
Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.
Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
Primer for copolymerization of styrene, acrylonitrile, vinylacetate, methacrylates and acrylates.
Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.
Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
White and odorless. Element additive in the treatment of the steel surface. Metal extraction, flotation aid for copper ores.
Ammonium thiocyanate product is a colorless powder, odorless, higrocópicos, readily soluble in water and ethyl alcohol.
Tolyltriazole is a colorless or white powder or granule. It is a mixture of 4-methyl benzotriazole and 5-methyl-benzotriazole, melting point is 80 C to 86 C, soluble in ethanol, benzene, toluene, chloroform and aqueous liquor, and hardly soluble in water.