Multichemie

LOGIN
Português  Português

PRODUCTS

3-Methoxypropylamine (MOPA)

3-methoxypropylamine is a slightly yellowish colorless liquid, free from suspended in water and is miscible in almost all common organic solvents.

FISPQ

Quotation

ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)

PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.

FISPQ

Quotation

Glacial Acrylic Acid (GAA)

Acrylic Acid, also called propenoic acid or vinyl carboxylic acid is an unsaturated monocarboxylic acid which belongs to the series of fatty acids. It is a colorless liquid with a penetrating odor.

FISPQ

Quotation

Citric Acid (Mono / Anhydrous)

The Citric acid is a weak organic acid, is used as a natural preservative (antioxidant), is a colorless solid.

FISPQ

Quotation

Itaconic Acid

The Itaconic Acid or methyl succinic ene, is used primarily as a co-monomer in the production of styrene butadiene latex and acryl nitril acrylate with applications in the paper coating industry and architecture. It is a white crystalline powder, soluble in water and partially soluble in methanol, ethanol or acetone.

FISPQ

Quotation

Oxalic Acid

Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.

FISPQ

Quotation

P-Toluene Sulfonic Acid - APTS 65/95%

P-Toluene Sulfonic Acid is a strong organic acid, approximately one million times stronger than benzoic acid. Also unlike some strong mineral acids (especially nitric acid, sulfuric acid and perchloric acid), P-Toluene Sulfonic acid is not an oxidizer.

FISPQ

Quotation

Sulfamic Acid

The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.

FISPQ

Quotation

Aminoethylethanolamine (AEEA)

Aminoethylethanolamine is a colorless viscous liquid, soluble in water and slightly soluble in ether. Air absorbs carbon dioxide releasing slight odor of ammonia.

FISPQ

Quotation

Anhydrous Sodium Borohydride

Sodium borohydride, also known as sodium tetrahydroborate. This white solid, as a powder usually found soluble in methanol and water but reacts with both the absence of a base.

FISPQ

Quotation

Butylhydroxytoluene (BHT)

BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.

FISPQ

Quotation

Potassium Carbonate

Potassium carbonate is a white powder soluble in water which forms a strongly alkaline solution and releases heat (exothermic reaction), is insoluble in alcohol. It can be produced by the reaction of carbon dioxide absorption by potassium hydroxide. It is deliquescent, often presenting as a damp or wet solid. It has historically been used to manufacture soap, glass (as a flux) and porcelain can also be used as a buffering agent in the production of mead and wine. Other denominations of potassium carbonate: Carbonate dipotassium, carbonate of potash, dipotassium salt, pearl gray, Potash, tartar salt, Artemisia salt.

FISPQ

Quotation

Cyclohexanone

It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.

FISPQ

Quotation

Benzalkonium Chloride 60% and 80%

Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.

It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.

FISPQ

Quotation

Benzyl chloride

The benzyl chloride is a liquid solvent used as intermediate agent in a wide range of segments.

FISPQ

Quotation

Dicyandiamide

White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.

FISPQ

Quotation

Dicyclohexanamine.

Diethanolamine (DEA)

The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.

FISPQ

Quotation

Diethylenetriamine (DETA)

Diethylenetriamine is a colorless liquid suspension-free, water-miscible and in almost all organic solvents.

FISPQ

Quotation

Dimethylethanolamine (DMEA)

The DMEA is a clear liquid with a slight ammonia odor. It is water miscible, and ether alcohols.

Quotation

Dimethylformamide (DMF)

Colorless liquid with faint characteristic odor, does not decompose distillation, water-miscible alcohols, ethers, ketones, esters, carbon disulfide, and aromatic and chlorinated hydrocarbons. The DMF solvent properties are especially attractive due to the high dielectric constant aprotic solvent and a wide range of liquid and low volatility. It is often used for chemical reactions and other applications requiring a high solvency power. The product is known as a universal solvent.

Quotation

Glycerin Bidistilled

Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.

FISPQ

Quotation

Glyoxal 40%

Glyoxal is a colorless to yellow liquid with a slight odor miscible in water.

FISPQ

Quotation

Sodium Gluconate

Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.

FISPQ

Quotation

Glutaraldehyde 50 %

Glutaraldehyde 50 % is a liquid colorless to yellowish, and may be water soluble.

FISPQ

Quotation

Sodium Hydrosulfite

Melamine

Melamine is an alkaline substance, considered a trimer of cyanamide, with 66% of its mass consists of nitrogen. It is used in the manufacture of plastics (with formaldehyde) and flame retardant products. It is mainly condensed with formaldehyde to produce melamine- formaldehyde, which hardens when heated.

FISPQ

Quotation

Methyl Isobutyl Ketone (MIBK)

It is a colorless liquid ketone aspect, widely used as a solvent.

FISPQ

Quotation

Monoethanolamine (MEA)

Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.

FISPQ

Quotation

Morpholine

Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.

FISPQ

Quotation

Sodium Nitrite

Paraformaldehyde 91/93%

Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.

FISPQ

Quotation

Phosphorus Pentoxide

The phosphorous pentoxide is white crystalline solid pungent phosphoric acid anhydride. It is a powerful desiccant.

FISPQ

Quotation

Potassium Permanganate

Potassium permanganate is presented in the form of crystalline powder, odorless violet color.

FISPQ

Quotation

Ammonium Persulfate

Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.

FISPQ

Quotation

Potassium Persulfate

Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.

FISPQ

Quotation

Sodium Persulfate

Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.

FISPQ

Quotation

Antimony trioxide

Designer by Neoware - Criação e Desenvolvimento de Websites e Sistemas - Desafie nossa Criatividade