1,4-Naphthoquinone is a dark brown color powder. The substance is derived from naphthalene oxidation with chromium trioxide.
1,4-Butanediol is a versatile chemical intermediate, presenting himself as a colorless, non-corrosive, high boiling point. 1,4-Butanediol is completely soluble in water, ketones, acetates and glycol esters, but can be miscible or partially miscible aromatic or chlorinated hydrocarbon.
2-Hydroxypropyl Acrylate (HPA)
2-Hydroxypropyl Acrylate homopolymers and copolymers form. Copolymers of 2-hydroxypropyl acrylate may be prepared with acrylic acid and salts, amides and esters, and methacrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl, vinylidene chloride, styrene, butadiene, unsaturated polyesters and drying oils. 2-Hydroxypropyl Acrylate is also very useful feedstock for chemical synthesis, since it readily undergoes addition reactions with a wide variety of organic and inorganic compounds.
2-Hydroxypropyl Methacrylate (HPMA)
2-Hydroxypropyl methacrylate is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.
2- Methyl Imidazol is presented in the form of colorless or yellowish crystals with amine odor.
Glacial Acrylic Acid (GAA)
Acrylic Acid, also called propenoic acid or vinyl carboxylic acid is an unsaturated monocarboxylic acid which belongs to the series of fatty acids. It is a colorless liquid with a penetrating odor.
Citric Acid (Mono / Anhydrous)
The Citric acid is a weak organic acid, is used as a natural preservative (antioxidant), is a colorless solid.
Fumaric Acid is a dicarboxylic acid, unsaturated, normal chain, which presents itself in the form of white crystalline solid. It is soluble in alcohol, slightly soluble in ether and sparingly soluble in chloroform. Used mainly in the production of polyesters and alkyd resins, plasticizers (fumarates), besides being an important additive for the food industry.
The Itaconic Acid or methyl succinic ene, is used primarily as a co-monomer in the production of styrene butadiene latex and acryl nitril acrylate with applications in the paper coating industry and architecture. It is a white crystalline powder, soluble in water and partially soluble in methanol, ethanol or acetone.
Oxalic Acid (also known as ethanedioic acid) is a crystalline solid, toxic, belonging to the family of dicarboxylic acids. It is soluble in water, ether and alcohol. Oxalic acid is one of strong acids in organic compounds. Unlike other carboxylic acids, oxalic acid is easily oxidized to form less soluble salts oxalates.
P-Toluene Sulfonic Acid - APTS 65/95%
P-Toluene Sulfonic Acid is a strong organic acid, approximately one million times stronger than benzoic acid. Also unlike some strong mineral acids (especially nitric acid, sulfuric acid and perchloric acid), P-Toluene Sulfonic acid is not an oxidizer.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Trimellitic anhydride Benzene-1,2,4-tricarboxylic anhydride
TrimTrimellitic Anhydride is a chemical form that reaffirms that many industrial foods are needed. One of the main applications of trimellitic anhydride is the esterification of alcohols.
This product is mainly used as raw material of PVC plasticizer, trimiquitate tricapryl (TOTM) and polyester resin. In addition, it can be used as the polyatomic acid, epoxy hardener, adhesive, stabilizer, surfactant, synthetic colorant, color and film, etc. of the heat-resistant and insulating layer presser and heat-resistant varnish water paint.
Colorless liquid, stable under normal conditions of use and storage. It promotes urethane reaction and are commonly used in high rigid foam applications of water to reduce friability.
Ammonium bifluoride is a white or transparent crystal with characteristic odor. It is deliquescent, slightly soluble in alcohol and readily soluble in cold water. In hot water has strong acidity and toxicity. It is used as a chemical reagent, glass production, used as an industrial disinfectant, preservative, silicon and copper treatment agent, detergent ceramics, alloys electrons and water supply system of the boiler. It is also used in cleaning oil pipe.
Anhydrous Sodium Borohydride
Sodium borohydride, also known as sodium tetrahydroborate. This white solid, as a powder usually found soluble in methanol and water but reacts with both the absence of a base.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
Propylene carbonate is a liquid with high boiling, non-volatile and colorless. It has a limited miscibility with water at room temperature, but is completely miscible with many organic solvents (eg ether, acetone, glycol, chloroform, DMF, ethyl alcohol, ethyl acetate).
It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.
It is a clear to yellowish liquid with fishy odor, melting point of -17.7 ° C and boiling point of 134.5 ° C, miscible with water. Like other amines, alkaline medium is compared to strong bases such as NaOH, but is a stronger base than their corresponding aromatic, aniline, which differs only in that its ring is aromatic. It is flammable with a flashpoint of 28.6 ° C. Explosive mixtures with air can be formed above 26 ° C.
Cyclo-hexalamina is used as an intermediate in the synthesis of some herbicides, antioxidants, vulcanization accelerators, drugs (e.g., mucolytics, analgesics, bronchodilators, corrosion inhibitors, some sweeteners (especially cyclamates), etc.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
Sodium chlorite (30%, 40% and 82% anhydrous)
Solid sodium chlorite is a white crystalline powder or yellow-green, slightly hygroscopic. Easily soluble in water. It is used in paper manufacturing, the bleaching of the fibers. The main application is the sodium chlorite to generate chlorine dioxide for bleaching and stripping of textile fibers, wood pulp and paper.
Dibutylamine (DNBA) is a secondary amine, is in the form of a colorless liquid with ammonia odor.
White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.
The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.
Diethylaniline or N, N-diethylaniline is the organic compound, the aniline derivative dietilado. It is a tertiary amine, similar ethylated N, N-dimethylaniline (DMA), also called N-fenildietilamina, diethylamino benzene, DEA N, N-dietilbenzenamina; N, N-dietilaminobenzeno. It is presented as a pale yellow to brown liquid with a melting point of 0 ° C and solubility in water of 1.4 g / 100ml.
Diethylenetriamine is a colorless liquid suspension-free, water-miscible and in almost all organic solvents.
Dimethyl amine 60% (DMA 60)
Colorless liquid as the amine odor, hazardous reactions with oxidizing materials and exothermic reactions with acids, is water miscible. It intermediate for the chemical industry, for example, the production of N, N-dimethylformamide, N, N-dimethylacetamide and dimethyl aminoalcohols. Initial product for vulcanization accelerators, emulsifiers, plasticizers, corrosion inhibitors, crop protection agents and pesticides.
Colorless liquid with faint characteristic odor, does not decompose distillation, water-miscible alcohols, ethers, ketones, esters, carbon disulfide, and aromatic and chlorinated hydrocarbons. The DMF solvent properties are especially attractive due to the high dielectric constant aprotic solvent and a wide range of liquid and low volatility. It is often used for chemical reactions and other applications requiring a high solvency power. The product is known as a universal solvent.
Ethylenediamine is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.
Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.
Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.
Glutaraldehyde 50 %
Hexamethylene tetramine (Urotropina)
It is used in the plastics industry as phenol-formaldehyde hardener and urea formaldehyde resins, as a vulcanization accelerator, urea as an additive to fertilizers, avoiding hardening and improves the fluidity in the manufacture of metals as a corrosion inhibitor in production of pesticides, in the manufacture of fuel pellets in analytical chemistry as a component of buffers.
Imidazole or imidazole is an organic compound, aromatic heterocyclic and classified as alkali. It is a yellowish crystal with amine odor.
LAUROX is a white solid dilauroyl peroxide used as co-polymerization initiators of styrene, ethylene, vinyl chloride, vinylidene chloride, acrylates and methacrylates, being a thermally unstable substance that can undergo self-accelerating decomposition. In many cases they offer higher reactor efficiency by combining with a more reactive initiator such as peroxydicarbonate.
Melamine is an alkaline substance, considered a trimer of cyanamide, with 66% of its mass consists of nitrogen. It is used in the manufacture of plastics (with formaldehyde) and flame retardant products. It is mainly condensed with formaldehyde to produce melamine- formaldehyde, which hardens when heated.
Methyl Isobutyl Ketone (MIBK)
Sodium Methylate 30%
Sodium methylate is a versatile reaction intermediate used in a wide variety of organic syntheses. It is a clear liquid.
Pure sodium methylate is a white powder and has the following properties: it is sensitive to oxygen and flammable. Soluble in methanol and ethanol. When reacted with water, it decomposes in methanol and sodium hydroxide. Decomposition temperature above 126.6 ° C.
Sodium Methylate Powder
White powder. It is sensitive to oxygen and flammable. Soluble in methanol and ethanol. Reacts with water to decompose in methanol and sodium hydroxide. Decomposition temperature above 126.6 ° C.
Methyl Diethanolamine (MDEA)
Hygroscopic liquid with amine odor, miscible in all proportions with water and in most organic solvents. It acts as a tertiary amine or alcohol. The product is stable at elevated temperatures, but must be keep away from oxidants and acids.
Mono Methylethanolamine (MMEA)
MMEA is a colorless, hygroscopic liquid with an odor similar to amine. The freshly distilled product is colorless, but prolonged storage can cause yellowing. MMEA is miscible in all proportions with water. It is also soluble in most organic solvents.
Chemically it behaves as a secondary amine and an alcohol. Neutralization of amino acids by function results in salt formation. The product is relatively stable at elevated temperatures, but must be keep away from oxidants and acids.
Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.
N-Methyl 2-Pyrrolidone (NMP)
N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
Pentaerythritol, a white crystalline polyol is a "building block" in organic synthesis for the preparation of many polyfunctional compounds such as the explosive PETN and pentaerythritol triacrylate. Pentaerythritol derivatives are components of alkyd resins, varnishes, PVC stabilizers, tall oil esters, olefins and antioxidants.
PERKADOX CH 50 is used as a curing agent for unsaturated polyester resins and acrylic resins. It offers excellent free flowing properties. PERKADOX CH 50 provides a very fast curing that is hardly influenced by moisture and fillers. Being thermally unstable substance, it can undergo self-accelerated decomposition. Easy to disperse and dissolving rapidly in unsaturated polyester resins and acrylic resins.
Primer for copolymerization of styrene, acrylonitrile, vinylacetate, methacrylates and acrylates.
Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.
Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
The Resorcinol (Resorcinol) is an aromatic product, and water soluble crystalline appearance. It is used in a wide range of segments of the chemical industry as a reaction intermediate.
THF is tetrahydrofuran or a heterocyclic organic compound used as the solvent, obtained by hydrogenation of furan. It has low viscosity, dielectric constant of 7.6, similar to the odor of ethyl ether. It is soluble in water.
Ammonium thiocyanate product is a colorless powder, odorless, higrocópicos, readily soluble in water and ethyl alcohol.
TRIGONOX A-W70 is an organic peroxide, known as tert-butyl hydroperoxide in 70% solution. TRIGONOX can be used as bulk initiator in aqueous solution and emulsion polymerization of styrene, acrylates and methacrylates.
TRIGONOX B is a liquid pH neutral liquid, soluble in most organic solvents. Initiator for copolymerization of ethylene, styrene, acrylates and methacrylates. TRIGONOX B is a monofunctional peroxide that is used for the cross-linking of thermoplastic polyolefins.
Trigonox C, tert-butyl peroxybezoate, is an aromatic per-ester, which is used for curing unsaturated polyester resins at temperatures.
Initiator for the co-polymerization of styrene, butadiene, acrylonitrile,vinylacetate, acrylates and metacrylates.