ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)
PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.
Glacial Acrylic Acid (GAA)
Acrylic Acid, also called propenoic acid or vinyl carboxylic acid is an unsaturated monocarboxylic acid which belongs to the series of fatty acids. It is a colorless liquid with a penetrating odor.
P-Toluene Sulfonic Acid - APTS 65/95%
P-Toluene Sulfonic Acid is a strong organic acid, approximately one million times stronger than benzoic acid. Also unlike some strong mineral acids (especially nitric acid, sulfuric acid and perchloric acid), P-Toluene Sulfonic acid is not an oxidizer.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.
Tertiary Amines (C12 to C16, Farmin)
Amines are a class of organic chemical compounds nitrogenous derivatives of ammonia (NH3) and resulting from partial or complete replacement of the hydrogens of the hydrocarbon groups per molecule.
Benzotriazole (BTA) is a heterocyclic compound containing three nitrogen atoms, granular appearance and has white color, it is a polar compound very soluble in water, is not readily degradable.
Anhydrous Sodium Borohydride
Sodium borohydride, also known as sodium tetrahydroborate. This white solid, as a powder usually found soluble in methanol and water but reacts with both the absence of a base.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
Propylene carbonate is a liquid with high boiling, non-volatile and colorless. It has a limited miscibility with water at room temperature, but is completely miscible with many organic solvents (eg ether, acetone, glycol, chloroform, DMF, ethyl alcohol, ethyl acetate).
It is a clear to yellowish liquid with fishy odor, melting point of -17.7 ° C and boiling point of 134.5 ° C, miscible with water. Like other amines, alkaline medium is compared to strong bases such as NaOH, but is a stronger base than their corresponding aromatic, aniline, which differs only in that its ring is aromatic. It is flammable with a flashpoint of 28.6 ° C. Explosive mixtures with air can be formed above 26 ° C.
Cyclo-hexalamina is used as an intermediate in the synthesis of some herbicides, antioxidants, vulcanization accelerators, drugs (e.g., mucolytics, analgesics, bronchodilators, corrosion inhibitors, some sweeteners (especially cyclamates), etc.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
Anhydrous Zinc Chloride
Zinc chloride is in the form of colorless crystals or white and highly soluble in water. It is hygroscopic and deliquescent. Samples should be protected from moisture sources, including the water vapor present in the air. Zinc chloride finds wide application in textile processing, metallurgical fluxing agents, and chemical synthesis such as dehydrating agent.
The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.
Diethylethanolamine is a clear flammable liquid with amine odor. Used in paints and varnishes, water treatment, pharmaceutical industry, as corrosion inhibitor and neutralizer.
Diethylhydroxylamine 98% (DEHA 98)
The DMEA is a clear liquid with a slight ammonia odor. It is water miscible, and ether alcohols.
Colorless liquid with faint characteristic odor, does not decompose distillation, water-miscible alcohols, ethers, ketones, esters, carbon disulfide, and aromatic and chlorinated hydrocarbons. The DMF solvent properties are especially attractive due to the high dielectric constant aprotic solvent and a wide range of liquid and low volatility. It is often used for chemical reactions and other applications requiring a high solvency power. The product is known as a universal solvent.
Glycerol or propane-1,2,3-triol (IUPAC, 1993) is an organic compound belonging to the alcohol function. It is liquid at room temperature (25 ° C), hygroscopic, odorless, viscous and sweet taste. The name originates from the Greek word glykos which means sweet. The term Glycerin refers to the product in its commercial form, with purity above 95%.
Hexamethylene tetramine (Urotropina)
It is used in the plastics industry as phenol-formaldehyde hardener and urea formaldehyde resins, as a vulcanization accelerator, urea as an additive to fertilizers, avoiding hardening and improves the fluidity in the manufacture of metals as a corrosion inhibitor in production of pesticides, in the manufacture of fuel pellets in analytical chemistry as a component of buffers.
Methyl Diethanolamine (MDEA)
Hygroscopic liquid with amine odor, miscible in all proportions with water and in most organic solvents. It acts as a tertiary amine or alcohol. The product is stable at elevated temperatures, but must be keep away from oxidants and acids.
Mono Methylethanolamine (MMEA)
MMEA is a colorless, hygroscopic liquid with an odor similar to amine. The freshly distilled product is colorless, but prolonged storage can cause yellowing. MMEA is miscible in all proportions with water. It is also soluble in most organic solvents.
Chemically it behaves as a secondary amine and an alcohol. Neutralization of amino acids by function results in salt formation. The product is relatively stable at elevated temperatures, but must be keep away from oxidants and acids.
Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.
Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.
N-Methyl 2-Pyrrolidone (NMP)
N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
Potassium permanganate is presented in the form of crystalline powder, odorless violet color.
Ammonium persulfate is presented in the form of crystalline powder, hygroscopic, odorless and white in color. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
Potassium persulfate is presented in the form of crystalline powder, odorless white. Used as a primer for the solution or emulsion of monomers in cleaning and etching printed circuits, for activating copper and aluminum surfaces, such as bleach, starch modification and processing of paper pulp. complexing metal and process the denim bleaching cold.
Sodium persulfate is presented in the form of crystalline powder, odorless white. As a source of free radicals is used as the initiator. It is a powerful oxidizer. Used for polymerization of monomers and manufacture of printed circuit boards.
White and odorless. Element additive in the treatment of the steel surface. Metal extraction, flotation aid for copper ores.
Ammonium thiocyanate product is a colorless powder, odorless, higrocópicos, readily soluble in water and ethyl alcohol.
Tolyltriazole is a colorless or white powder or granule. It is a mixture of 4-methyl benzotriazole and 5-methyl-benzotriazole, melting point is 80 C to 86 C, soluble in ethanol, benzene, toluene, chloroform and aqueous liquor, and hardly soluble in water.