ACID 2-phosphonobutane 1,2,4 tricarboxylic acid (PBTC 50%)
PBTC has a low content of phosphoric, has structural features of phosphoric acid and carboxylic acid groups, which allow its properties of excellent corrosion inhibition and scale. His anti-scale property under high temperature is much better than the organofosfinas. Can enhance the solubility of the zinc salt, has good chlorine oxidation of compound tolerance and good synergy.
Trimethylene Amino Phosphonic Acid (ATMP 50%)
ATMP is a clear liquid (solution) of light yellow color soluble in aqueous and acidic solutions, and insoluble in most organic solvents. It is soluble in all proportions with water; NaOH 40% and 98% sulfuric acid.
Benzoic acid is the most important aromatic carboxylic acid. It is a solid flakes, white characteristic odor. The structure of benzoic acid favors the formation of intermolecular hydrogen bonds, despite the large volume occupied by the benzene ring.
Ethylene diphosphonic acid (HEDP 60%)
Clear liquid, viscous, colorless or pale yellow mainly used in boilers and heat exchanger pipes as chelating and corrosion resistant agent. It is also used for cleaning metal and non-metal, as stabilizer, bleach and color fixing agent for textile products.
Fumaric Acid is a dicarboxylic acid, unsaturated, normal chain, which presents itself in the form of white crystalline solid. It is soluble in alcohol, slightly soluble in ether and sparingly soluble in chloroform. Used mainly in the production of polyesters and alkyd resins, plasticizers (fumarates), besides being an important additive for the food industry.
The sulfamic acid is a product in form of white, indoro and non-hygroscopic crystals. It is moderately soluble in water, and form strongly acidic solutions, but can be easily handled in its crystalline form.
Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.
Aminoethylethanolamine is a colorless viscous liquid, soluble in water and slightly soluble in ether. Air absorbs carbon dioxide releasing slight odor of ammonia.
BHT is an antioxidant used to retard rancidity of fats and oils, aiding in the stabilization of many types of products and preventing changes in its color, odor or texture.
It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.
Benzalkonium Chloride 60% and 80%
Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.
It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.
Sodium chlorite (30%, 40% and 82% anhydrous)
Solid sodium chlorite is a white crystalline powder or yellow-green, slightly hygroscopic. Easily soluble in water. It is used in paper manufacturing, the bleaching of the fibers. The main application is the sodium chlorite to generate chlorine dioxide for bleaching and stripping of textile fibers, wood pulp and paper.
White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.
The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.
Diethylenetriamine is a colorless liquid suspension-free, water-miscible and in almost all organic solvents.
Diethylethanolamine is a clear flammable liquid with amine odor. Used in paints and varnishes, water treatment, pharmaceutical industry, as corrosion inhibitor and neutralizer.
Diethylhydroxylamine 98% (DEHA 98)
Ethylenediamine is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.
Glutaraldehyde 50 %
Methyl Isobutyl Ketone (MIBK)
Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.
N-Methyl 2-Pyrrolidone (NMP)
N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.
Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.
The phosphorous pentoxide is white crystalline solid pungent phosphoric acid anhydride. It is a powerful desiccant.