Multichemie

LOGIN
Português  Português

PRODUCTS

3-Methoxypropylamine (MOPA)

3-methoxypropylamine is a slightly yellowish colorless liquid, free from suspended in water and is miscible in almost all common organic solvents.

FISPQ

Quotation

Trimethylene Amino Phosphonic Acid (ATMP 50%)

ATMP is a clear liquid (solution) of light yellow color soluble in aqueous and acidic solutions, and insoluble in most organic solvents. It is soluble in all proportions with water; NaOH 40% and 98% sulfuric acid.

FISPQ

Quotation

Benzoic Acid

Benzoic acid is the most important aromatic carboxylic acid. It is a solid flakes, white characteristic odor. The structure of benzoic acid favors the formation of intermolecular hydrogen bonds, despite the large volume occupied by the benzene ring.

FISPQ

Quotation

Ethylene diphosphonic acid (HEDP 60%)

Clear liquid, viscous, colorless or pale yellow mainly used in boilers and heat exchanger pipes as chelating and corrosion resistant agent. It is also used for cleaning metal and non-metal, as stabilizer, bleach and color fixing agent for textile products.

FISPQ

Quotation

Phosphorous Acid

White crystal, easily soluble in water and alcohol. Used in agriculture as fertilizer raw material for the manufacture of phosphates, plastics stabilizer, pesticide production, among others.

FISPQ

Quotation

Fumaric Acid

Fumaric Acid is a dicarboxylic acid, unsaturated, normal chain, which presents itself in the form of white crystalline solid. It is soluble in alcohol, slightly soluble in ether and sparingly soluble in chloroform. Used mainly in the production of polyesters and alkyd resins, plasticizers (fumarates), besides being an important additive for the food industry.

FISPQ

Quotation

Propanoic acid

Isopropyl Alcohol

Isopropyl alcohol is a colorless liquid with a characteristic odor water soluble, volatile and highly flammable. Isopropyl alcohol may be used to clean electronic components. It is most suitable for this purpose because the percentage of water is less than 1%, and therefore the oxidation of the parts is almost null hypothesis. It is also widely used in the printing industry, in the composition of the wet offset printing process solution, and cleaning of aircraft electrical systems. Also used in glass-surface cleaning products, mixed with non-ionic detergent used in very specific products for cleaning eyeglasses, enzymatic detergents, etc.

FISPQ

Quotation

Aminoethylethanolamine (AEEA)

Aminoethylethanolamine is a colorless viscous liquid, soluble in water and slightly soluble in ether. Air absorbs carbon dioxide releasing slight odor of ammonia.

FISPQ

Quotation

Potassium Carbonate

Potassium carbonate is a white powder soluble in water which forms a strongly alkaline solution and releases heat (exothermic reaction), is insoluble in alcohol. It can be produced by the reaction of carbon dioxide absorption by potassium hydroxide. It is deliquescent, often presenting as a damp or wet solid. It has historically been used to manufacture soap, glass (as a flux) and porcelain can also be used as a buffering agent in the production of mead and wine. Other denominations of potassium carbonate: Carbonate dipotassium, carbonate of potash, dipotassium salt, pearl gray, Potash, tartar salt, Artemisia salt.

FISPQ

Quotation

Cyclohexanone

It is a clear oily liquid with an acetone odor; slightly soluble in water but miscible with common solvents. It is used as an industrial solvent, activator in oxidation reactions and used in the production of adipic acid, cyclohexanone resins, cyclohexanone oxime, caprolactam and nylon 6.

FISPQ

Quotation

Benzalkonium Chloride 60% and 80%

Benzalkonium chloride (alkyl dimethyl benzyl ammonium chloride) is a surface tension increasing agent and the cationic nitrogenous contact belongs to the group of quaternary ammonium compounds.

It is a salt readily soluble in water, alcohol and acetone. It is used as an antiseptic spermicide, nasal decongestant, and historically as a bactericide. Its use ranges from disinfecting skin and mucous membranes cleaning instruments undergoing sterilization, for growing peaches and even as a preservative.

FISPQ

Quotation

Anhydrous Zinc Chloride

Zinc chloride is in the form of colorless crystals or white and highly soluble in water. It is hygroscopic and deliquescent. Samples should be protected from moisture sources, including the water vapor present in the air. Zinc chloride finds wide application in textile processing, metallurgical fluxing agents, and chemical synthesis such as dehydrating agent.

FISPQ

Quotation

Dicyandiamide

White, odorless crystalline powder, readily soluble in water, alcohol and ether. It is usually used in the production of a large variety of chemicals.

FISPQ

Quotation

Dicyclohexanamine.

Diethanolamine (DEA)

The diethanolamine is a volatile product to room temperature, hygroscopic ammonia odor, and may be in solid or liquid form depending on temperature and degree of purity.

FISPQ

Quotation

Dimethyl amine 60% (DMA 60)

Colorless liquid as the amine odor, hazardous reactions with oxidizing materials and exothermic reactions with acids, is water miscible. It intermediate for the chemical industry, for example, the production of N, N-dimethylformamide, N, N-dimethylacetamide and dimethyl aminoalcohols. Initial product for vulcanization accelerators, emulsifiers, plasticizers, corrosion inhibitors, crop protection agents and pesticides.

FISPQ

Quotation

Dimethylacetamide (DMAC)

Dimethylacetamide is a good solvent for organic and inorganic raw materials. It is miscible with water, alcohols, ether, ketones and aromatic compounds.

FISPQ

Quotation

Epichlorohydrin

Epichlorohydrin is an aqueous fluid, without staining.

FISPQ

Quotation

Ethylenediamine (EDA)

Ethylenediamine is a colorless transparent liquid suspension free, soluble in water and in most common organic solvents.

FISPQ

Quotation

Sodium Gluconate

Sodium gluconate is a salt of gluconic acid produced by the fermentation of glucose. Usually presents as a white powder brown, depending on the production process. The crystalline sodium gluconate structure is easily solubilized in water. This same crystal configuration allows its total biodegradation in just two days, in addition to being non-toxic, non-corrosive and have a chelating action far superior to EDTA salts. The term chelating action the property of certain molecules form bonds with metal ions, preventing their transition in reactive environment; This action inhibits the corrosive effects of the metal ions from interfering, allowing the reaction to occur without the occurrence of interfering particles.

FISPQ

Quotation

Glutaraldehyde 50 %

Glutaraldehyde 50 % is a liquid colorless to yellowish, and may be water soluble.

FISPQ

Quotation

Hexamethylene tetramine (Urotropina)

It is used in the plastics industry as phenol-formaldehyde hardener and urea formaldehyde resins, as a vulcanization accelerator, urea as an additive to fertilizers, avoiding hardening and improves the fluidity in the manufacture of metals as a corrosion inhibitor in production of pesticides, in the manufacture of fuel pellets in analytical chemistry as a component of buffers.

FISPQ

Quotation

Methyl Isobutyl Ketone (MIBK)

It is a colorless liquid ketone aspect, widely used as a solvent.

FISPQ

Quotation

Monoethanolamine (MEA)

Monoethanolamine is a clear, slightly viscous and less volatile liquid ammonia odor, hygroscopic, water soluble and the majority of alcohols and polyols.

FISPQ

Quotation

Morpholine

Colorless oily liquid with special amine odor, soluble in water and various organic impregnates. Used as a neutralizing agent in water treatment or in the formulation of varnishes graphs.

FISPQ

Quotation

N-Methyl 2-Pyrrolidone (NMP)

N-Methyl Pyrrolidone, is a low volatility organic solvent, widely used in industry due to the low emission of volatile organic compounds and their solubility in water. It belongs to a class of dipolar aprotic solvents which also includes dimethylformamide, dimethylacetamide and dimethylsulfoxide.

FISPQ

Quotation

Paraformaldehyde 91/93%

Paraformaldehyde is a polymer of low molecular weight, white solid with a characteristic pungent formaldehyde odor. Paraformaldehyde is slightly soluble in alcohols, insoluble in ethers, hydrocarbons and carbon tetrachloride. It is on insoluble in cold water but soluble in hot water with depolymerization. Paraformaldehyde is stable under recommended storage conditions.

FISPQ

Quotation

Phosphorus Pentoxide

The phosphorous pentoxide is white crystalline solid pungent phosphoric acid anhydride. It is a powerful desiccant.

FISPQ

Quotation

Hydroxylamine Sulfate

White and odorless. Element additive in the treatment of the steel surface. Metal extraction, flotation aid for copper ores.

FISPQ

Quotation

Designer by Neoware - Criação e Desenvolvimento de Websites e Sistemas - Desafie nossa Criatividade